Configuring Display Override Settings (Quad)¶
|Enable Attached Display Override||—||x||✔||✔|
|Enable Preferred Resolution Override||—||x||✔||✔|
|Enable Display Cloning||—||x||✔||✔|
From the OSD Display page, as shown next, you can enable the Extended Display Identification Data (EDID) override mode for a setup with two or four attached displays.
The Display page lets you enable the Extended Display Identification Data (EDID) override mode. You can access this page from the Options > Configuration > Display menu.
Performing a hot plug reset won't revert the display for a custom resolution
If you have set a custom resolution, performing a hot plug reset will not cause the display to revert to its previous resolution if both Enable Attached Display Override and Enable Preferred Resolution Override are enabled at the same time. If you want to retain your custom resolution in the event of a hot plug (or power outage, and so on), ensure that both these fields are enabled.
OSD TERA2140 Display page
The following parameters display on the TERA2140 OSD Display page:
OSD TERA2140 Display Parameters
|Enable Attached Display Override||This option is intended for legacy systems. It configures the client to send default EDID information to the host when a monitor cannot be detected or is not attached to the client. In versions of Windows prior to Windows 7, once the host had no EDID information, it would assume no monitors were attached and would never recheck. This option ensures that the host always has EDID information when the client is in session.
The following default resolutions are advertised when this option is enabled:
|Enable Preferred Resolution Override||EEnable this option when a display is attached but cannot be detected by the system, and you want to specify a preferred resolution for the display. The same default list of will be advertised, except the preferred resolution you configure here for a display will be sent as the native resolution instead of the default native resolution of 1024x768.
See Caution note for information on how to retain a custom resolution in the event of a hot plug, power outage, and so on.